Custom Silicone Shower Squeegee

Send the intended surfaces, blade width, handle length and angle, storage concept, reference sample or drawing, destination market, expected order quantity, colors, logo artwork, validation expectations and packaging preference.

Yes. Usable width, edge thickness, support section, flexibility and corner geometry can be reviewed together. Final geometry must balance surface contact, recovery, mold filling, venting, demolding and the buyer's agreed use method.

Both architectures can be evaluated. A one-piece molded design may simplify cleaning and assembly, while an insert or overmolded support may change stiffness, tooling and validation. The right choice depends on the approved performance and cost brief.

Buyer and factory should agree the test surface, water film, contact angle, pressure or fixture, stroke count and visual acceptance criteria. Any result applies only to the approved product revision and documented conditions.

No universal performance should be assumed. Surface flatness and texture, residue, water chemistry, contact angle, pressure and blade condition affect the wipe track. Intended surfaces and limitations should be stated in the finished-product instructions.

Yes. Review Pantone-referenced colors, molded branding, a hanging eye or separate hook, instruction cards, paper sleeves, boxes, labels and cartons. Physical color, fit and the complete packed sample require approval.

The buyer should define a cleaning method compatible with the approved silicone and construction, followed by rinsing, drying, inspection and ventilated storage. Replace the product if the wiping edge is cut, permanently deformed or otherwise outside the stated criteria.

Blade width, edge complexity, handle and storage architecture, mold construction, silicone, colors, validation scope, packaging, quantity and current capacity influence the program. Commercial figures become firmer after the drawing and test plan are approved.